Turbo Tim
01-26-2009, 03:45 PM
I posted this over on the C....SS.net also...
Its up and running, this is not the kit as it will be released as, but it will give you an idea. There will also be an intercooled kit released soon. Since we have a mandrel bender in house, the charge pipe will only have welds on the MAF tube only. There is no noticeable turbo lag because we chose a good turbo to base the kit off of.
Keep in mind this is a rough kit picture.
http://www.zzperformance.com/products_img/966_1.jpg
And here is the dyno comparison:
http://www.zzperformance.com/products_img/922_2.jpg
Its up and running, this is not the kit as it will be released as, but it will give you an idea. There will also be an intercooled kit released soon. Since we have a mandrel bender in house, the charge pipe will only have welds on the MAF tube only. There is no noticeable turbo lag because we chose a good turbo to base the kit off of.
Keep in mind this is a rough kit picture.
http://www.zzperformance.com/products_img/966_1.jpg
And here is the dyno comparison:
http://www.zzperformance.com/products_img/922_2.jpg