9\27 TOG Header "Group Purchase Price" [Archive] - Chevy Cobalt SS Forum : Chevrolet Cobalt SS Forums

: 9\27 TOG Header "Group Purchase Price"


TOGHeaders
09-27-2005, 07:20 PM
Description and pricing below:

Performance, Horsepower, Torque and Fuel Economy can all be yours with The Other Guys Exhaust Headers for the 2.0 Supercharged Chevrolet Cobalt SS and Saturn ION Redline. These headers are of the highest quality and The Other Guys are so confident of their workmanship they offer a Full Unlimited Lifetime Warranty against defects and damage. (Excludes coating and header wraps) The Other Guys Headers come standard with a hi-polished silver ceramic thermal coating on ALL surfaces, both inside and out, which greatly increases corrosion resistance and heat transfer within the pipes.

Proven results for serious power driven individuals! What are you waiting for!

TOG Headers features:

• 3/8” laser-cut flanges
• 4 into 1 design with 3” collector
• 14 gauge mild steel with 1 Ύ” mandrel bent primary tubes
• All stock mounting points are retained including the O2 sensor position
• Hi-polished silver ceramic thermal coating inside and out.
• Easy bolt-on installation to factory stock exhaust
• All necessary hardware and gaskets included
• Will not void factory warranty
• No-fault lifetime warranty
• *49 state legal, Pending C.A.R.B. certification

Pre-production group purchase for the header only: $420.00 shipped (Continintal U.S. and Canada)

Performance, Horsepower, Torque and Fuel Economy can all be yours with The Other Guys Exhaust 3” down pipe with Hi-flow catalytic converter. Designed as a direct bolt-on to The Other Guys Header for the 2.0 Supercharged Chevrolet Cobalt SS and Saturn ION Redline with stock exhaust. The Other Guys do not cut corners and only use industry proven and quality performance exhaust components. The down pipe includes the highest quality “Flex Pipe” in the industry! The flexible pipe is double woven with stainless steel mesh inside and outside for strength, durability and noise reduction. They chose a catalytic converter that sets, rather than meets, the highest standards of product performance and efficiency in the industry. Aluminized steel piping used through out, to include a 3” to 2 ½” reducer to mate back to the stock exhaust. They finish with a Satin silver ceramic thermal coating on ALL surfaces, both inside and out, which greatly increases corrosion resistance and heat transfer within the pipes.

Proven results for serious power driven individuals! What are you waiting for!

TOG Down pipe with Hi-flow catalytic converter features:

• 3” Down pipe with Hi-flow catalytic converter
• Direct bolt-on to The Other Guys Header only
• Double woven with stainless steel mesh flex pipe
• Hi-flow catalytic converter with 3” inlet \ outlet
• 3 “ Aluminized steel piping through out
• Satin silver ceramic thermal coating on ALL surfaces, both inside and out
• 3” to 2 ½” reducer to mate back to the stock exhaust.
• All necessary hardware and gaskets included

*For off road use only*
Federal Law stipulates that a converter isn't supposed to be replaced with an aftermarket unit unless a vehicle has 50,000 miles or is 5 years old. Prior to that, the original equipment converter is covered by the factory warranty. If it fails, the vehicle owner is supposed to take it to the dealer and have it replaced under warranty. The only exception is if the original converter was physically damaged. Please review Federal, state and local laws regarding the replacement of your catalytic converter.


*This can only be used in conjunction with TOG headers. It will not work with stock manifolds*

Pre-production group purchase for the Down pipe with Hi-flow catalytic converter only: $295.00 shipped (Continintal U.S. and Canada)

Total for both pcs. is $715.00 shipped.

We are currently accepting Pre-production group purchase orders and will continue taking orders until Friday October 14th at 4:45 P.M. (PST)

All orders can only be placed by calling TOG direct at (951)351-9466. Visa, Master Card and American Express (Credit card, Debit Card) are forms of payment. Please be prepared to provide your information. Your order will be promptly invoiced and processed. All information provided is strictly confidential.

Thanks to all of you who provided your input and suggestions.

Regards,

Jon
The Other Guys Performance Products, Inc.

evilcobaltSS
09-27-2005, 07:25 PM
Description and pricing below:

Performance, Horsepower, Torque and Fuel Economy can all be yours with The Other Guys Exhaust Headers for the 2.0 Supercharged Chevrolet Cobalt SS and Saturn ION Redline. These headers are of the highest quality and The Other Guys are so confident of their workmanship they offer a Full Unlimited Lifetime Warranty against defects and damage. (Excludes coating and header wraps) The Other Guys Headers come standard with a hi-polished silver ceramic thermal coating on ALL surfaces, both inside and out, which greatly increases corrosion resistance and heat transfer within the pipes.

Proven results for serious power driven individuals! What are you waiting for!

TOG Headers features:

• 3/8” laser-cut flanges
• 4 into 1 design with 3” collector
• 14 gauge mild steel with 1 Ύ” mandrel bent primary tubes
• All stock mounting points are retained including the O2 sensor position
• Hi-polished silver ceramic thermal coating inside and out.
• Easy bolt-on installation to factory stock exhaust
• All necessary hardware and gaskets included
• Will not void factory warranty
• No-fault lifetime warranty
• *49 state legal, Pending C.A.R.B. certification

Pre-production group purchase for the header only: $420.00 shipped (Continintal U.S. and Canada)

Performance, Horsepower, Torque and Fuel Economy can all be yours with The Other Guys Exhaust 3” down pipe with Hi-flow catalytic converter. Designed as a direct bolt-on to The Other Guys Header for the 2.0 Supercharged Chevrolet Cobalt SS and Saturn ION Redline with stock exhaust. The Other Guys do not cut corners and only use industry proven and quality performance exhaust components. The down pipe includes the highest quality “Flex Pipe” in the industry! The flexible pipe is double woven with stainless steel mesh inside and outside for strength, durability and noise reduction. They chose a catalytic converter that sets, rather than meets, the highest standards of product performance and efficiency in the industry. Aluminized steel piping used through out, to include a 3” to 2 ½” reducer to mate back to the stock exhaust. They finish with a Satin silver ceramic thermal coating on ALL surfaces, both inside and out, which greatly increases corrosion resistance and heat transfer within the pipes.

Proven results for serious power driven individuals! What are you waiting for!

TOG Down pipe with Hi-flow catalytic converter features:

• 3” Down pipe with Hi-flow catalytic converter
• Direct bolt-on to The Other Guys Header only
• Double woven with stainless steel mesh flex pipe
• Hi-flow catalytic converter with 3” inlet \ outlet
• 3 “ Aluminized steel piping through out
• Satin silver ceramic thermal coating on ALL surfaces, both inside and out
• 3” to 2 ½” reducer to mate back to the stock exhaust.
• All necessary hardware and gaskets included

*For off road use only*
Federal Law stipulates that a converter isn't supposed to be replaced with an aftermarket unit unless a vehicle has 50,000 miles or is 5 years old. Prior to that, the original equipment converter is covered by the factory warranty. If it fails, the vehicle owner is supposed to take it to the dealer and have it replaced under warranty. The only exception is if the original converter was physically damaged. Please review Federal, state and local laws regarding the replacement of your catalytic converter.


*This can only be used in conjunction with TOG headers. It will not work with stock manifolds*

Pre-production group purchase for the Down pipe with Hi-flow catalytic converter only: $295.00 shipped (Continintal U.S. and Canada)

Total for both pcs. is $715.00 shipped.

We are currently accepting Pre-production group purchase orders and will continue taking orders until Friday October 14th at 4:45 P.M. (PST)

All orders can only be placed by calling TOG direct at (951)351-9466. Visa, Master Card and American Express (Credit card, Debit Card) are forms of payment. Please be prepared to provide your information. Your order will be promptly invoiced and processed. All information provided is strictly confidential.

Thanks to all of you who provided your input and suggestions.

Regards,

Jon
The Other Guys Performance Products, Inc.

Well you hyped it up enough so I will buy a setup but let me tell you one thing if this thing doesn't work or is junk I am going to rip your ass all over the net. But on another note I will be the first to sign up and buy one. :D

tube
09-27-2005, 09:07 PM
I ( like everyone else ) want to see horsepower figures before I buy.

selfinfliction
09-27-2005, 10:09 PM
I ( like everyone else ) want to see horsepower figures before I buy.


header only #'s will be released tomorrow

header + downpipe #'s will be released as soon as scheduling allows

BlAckOnBLaCK
09-27-2005, 10:35 PM
I see that you are taking pre-orders till Oct 14th. When do you plan on shipping out orders? Sorry for asking if you already said this somewhere.

TOGHeaders
09-27-2005, 10:42 PM
After the 14th all the necessary material will be ordered and production will begin the week of the 24th. Depending on the quantity ordered, expect 10 - 14 days to complete the production run then another week for coating, then boxing everything for shipping in November.

EastCoastZ
09-29-2005, 08:41 PM
Sounds good! Count me in for just the header.

EndZz
09-29-2005, 10:20 PM
Count me in for the whole package but lets see some numbers I'm pretty anxious to see.

Ydtrack
09-30-2005, 09:43 AM
http://www.ricermath.com/sspics/dyno2.jpg

Ydtrack
09-30-2005, 09:47 AM
Pre-Production Header, Production headers will be ceramic coated.

http://www.ricermath.com/sspics/header002.jpg

Stock Manifold

http://www.ricermath.com/sspics/manifold.jpg