|
: Injen Cold Air Intake for Cobalt SS / SC. jmc007 10-03-2005, 07:04 PM Hi ! I was told today (by e-mail) by Injen that they will release their intake within the week for the Cobalt SS / SC. I cannot know if it's true, but that is what thet wrote to me. So stay tuned on their website. Have a nice day !!! detroit_tuner 10-04-2005, 10:48 AM That gives me a woody... CobaltSSilver 10-04-2005, 07:08 PM Yeah I saw in add for it in Import Tuner today. Anyone know if they have Dyno results on it? I know that K&N have about 8 HP and 7lbs/ft gains on theirs. CobaltSSilver 10-04-2005, 07:10 PM It looks like it is only or the 2.2 not the 2.0 SC. http://www.injen.com/7024_mkt.html jmc007 10-04-2005, 07:23 PM No the 2.2 you posted is already released but the 2.0 WILL be release sonner, maybe this week. Show Off 10-05-2005, 11:27 AM i already have the 2.2 intake in my car, i love it... but its a pain in the 2.2's cause i have to take the front bumper off and body kit to install the CAI portion. and every 30k miles of that (to clean the filter) will kill me so its only on short ram. i can still feel it good and sounds turely awsome. no doubt when they come out with it for ss/sc, you all will fn love it!!!! Mercury 10-05-2005, 11:30 AM I doubt the gains will be any different from the K&N iso 10-05-2005, 11:00 PM i already have the 2.2 intake in my car, i love it... but its a pain in the 2.2's cause i have to take the front bumper off and body kit to install the CAI portion. and every 30k miles of that (to clean the filter) will kill me so its only on short ram. i can still feel it good and sounds turely awsome. no doubt when they come out with it for ss/sc, you all will fn love it!!!! you can't just remove the wheel and wheel well liner like we've been doing to get to the airbox on our ss's? where's the CAI portion go? into the fender well, correct? you shoud be able to just jack up the car, remove the wheel, remove the wheel well liner and it would be right there. jmc007 10-10-2005, 02:12 PM HI ! You guys are better to stay tuned ; I gave another call at Injen today an succesfully talk to a tech person. They will release their CAI VERY SOON for the Cobalt SS / SC. It has been tuned with their new MR technology, for a safe air / fuel ratio. Look out the numbers the tech man said they achieved, for those who know Injen I think they are very capable of these numbers, espacially for a 200+ WHP car ! -17 WHP and 16 ft-lb torque ! Those are the highest numbers available right now ! They said the intake will be released this week in a couple of days ! Stay tuuuuuuuuuuuuuuuunnnnnnnned )) I was going to order the Fujita one today, but I will WAIT again ! Look out (as an example) their limited ediution CAI for the WRX STI ! http://www.injen.com/rs1201_mkt.html Have a nice day ! EndZz 10-16-2005, 02:14 AM Where Is It I'm Freakin Dieing Here!!!!!!!!! 16sy16 10-16-2005, 06:41 PM Do both of these kits require running without the wheel housing? jmc007 10-16-2005, 07:20 PM Neither Fujita or K&N Cold Air Intake for the Supercharged Cobalt SS need the wheel housing to be removed to run ! Don't know about the Injen, since it has not been released yet ! 16sy16 10-17-2005, 10:24 AM Neither Fujita or K&N Cold Air Intake for the Supercharged Cobalt SS need the wheel housing to be removed to run ! Don't know about the Injen, since it has not been released yet ! Sweet! I was reading through install how-to's, and they all say pull the wheel housing. I don't care about pulling it to install, I just want it in place when driving (Colorado winters). Thanks for the input :cool: h8beingbored 10-18-2005, 12:32 AM eBay link (http://cgi.ebay.com/ebaymotors/INJEN-Cold-Air-Intake-05-06-Chevy-Cobalt_W0QQcmdZViewItemQQcategoryZ38634QQitemZ8007 536196QQrdZ1QQsspagenameZWDVW) for injen intake :cool: Mercury 10-18-2005, 12:53 AM eBay link (http://cgi.ebay.com/ebaymotors/INJEN-Cold-Air-Intake-05-06-Chevy-Cobalt_W0QQcmdZViewItemQQcategoryZ38634QQitemZ8007 536196QQrdZ1QQsspagenameZWDVW) for injen intake :cool: That looks to be the intake for the 2.2L Cobalt. EndZz 10-18-2005, 05:24 PM It sure is! iso 10-18-2005, 08:15 PM Sweet! I was reading through install how-to's, and they all say pull the wheel housing. I don't care about pulling it to install, I just want it in place when driving (Colorado winters). Thanks for the input :cool: yea, you have to remove the liner for the install since there's really no other way to get to the intake, other then that you can still put the liner back on. jmc007 10-25-2005, 06:54 PM If you go to the Injen site, there is a new menu : http://injen.com/selectproduct.cgi There is now two Injen CAIs available for the Cobalt SS, part number SP7026P and SP7026BLK ! No HP claims yet ... Can't wait to view the dyno chart ... p7x 10-25-2005, 07:07 PM Can't wait to see what the gains are!!! jmc007 10-25-2005, 07:26 PM 2.2 is an error, it is 2.0, because the 2.2 is already out for a couple of weeks. p7x 10-25-2005, 07:28 PM 2.2 is an error, it is 2.0, because the 2.2 is already out for a couple of weeks. i just checked for other cars and they had the srt4 as a 2.0L so they're messed up. I just want to make sure its for an SS S/C. jmc007 10-25-2005, 07:45 PM Pretty damn sure is the good one, because Injen told me (by e-mail and phone) that it would be relased in a couple of days for the SS, so here it is. EndZz 10-27-2005, 01:47 AM so then it is here right? Have you guys found a link to buy it? cause I can't jmc007 10-27-2005, 06:22 AM They will be available after the SEMA show. Just be careful on the gains they will claims ... After doing some testing with my Fujita intake, I am suspecting aftermarket intakes not to be optimised for our cars. | ||