|
jmc007 11-02-2005, 02:38 PM The speed shop I know got a 2006 SS / SC dynoed on a Mustang dyno and got an average of 20 WHP and 10 WTQ more than the 2005 SS / SC. Anyone got a 2006 dynoed ? I am wondering if GM already included a reflash on the 2006 ? Thanks ! Have a nice day ! user1357 11-02-2005, 07:54 PM I am geting a 06 in a few weeks (once its built) then ill be off to a local dyno to see what it gets befor i bolt on magnaflow cat back and the tracbar thing. ill post when i get it done. 16sy16 11-05-2005, 11:30 AM The speed shop I know got a 2006 SS / SC dynoed on a Mustang dyno and got an average of 20 WHP and 10 WTQ more than the 2005 SS / SC. Anyone got a 2006 dynoed ? I am wondering if GM already included a reflash on the 2006 ? Thanks ! Have a nice day ! Does the shop compensate for temp, baro pressure, and humidity when testing? If not, that could be the problem. Or maybe the '05 they tested was built late on a Friday :D hehe... 69th post. CoBIZZLE 11-05-2005, 11:32 AM Or maybe the '05 they tested was built late on a Friday :D AAAAAHAHAHALOLOLOLOL!! :D Funny guy! 16sy16 11-05-2005, 11:36 AM AAAAAHAHAHALOLOLOLOL!! :D Funny guy! Thank you, thank you. I'll be here all week :cool: jmc007 11-05-2005, 07:36 PM This very speed shop got three 2005 SS/SC dynoed with an average of 192 WHP and 170 ft-lb torque. The 2006 did 212 WHP and 180 ft-lb torque. All cars stock. CobaltSSpeed 11-05-2005, 10:37 PM sounds like BS haha fleckenwhat 11-06-2005, 12:38 AM i agree. sounds like total bs. the only way i could see this happening is if they were ran on different dynos. gm has not made any changes on the sc for 06. jmc007 11-06-2005, 07:12 AM i agree. sounds like total bs. the only way i could see this happening is if they were ran on different dynos. gm has not made any changes on the sc for 06. OK so we will see what other 06 will do on the dynos ... Just to say that the ION redline 05 got a new reflash compared to the 04, and the 05 tend to make a few ponies more than the 04. Why not for the Cobalt SS/SC 06 ? dazednconfused75 11-06-2005, 09:28 AM OK so we will see what other 06 will do on the dynos ... Just to say that the ION redline 05 got a new reflash compared to the 04, and the 05 tend to make a few ponies more than the 04. Why not for the Cobalt SS/SC 06 ? Sounds like speculation to me. There were no same day, same dyno runs done between the '04 and '05s done and the '04s were flashed with the same software as the '05s in a TSB anyway. :rolleyes: littleSS 11-06-2005, 09:47 AM i dyno'd mine on a superflow stock and got 191.8 and 168.9 ft lbs but i know the super flows read a little less WopOnTour 11-07-2005, 12:33 AM This very speed shop got three 2005 SS/SC dynoed with an average of 192 WHP and 170 ft-lb torque. The 2006 did 212 WHP and 180 ft-lb torque. All cars stock.If it was a comparitive study, and they suspected calibration- all they needed to do was move the 06 PCM to one of the other Cobalts and pull'er again. WOT Darksun280 11-07-2005, 07:34 AM If it was a comparitive study, and they suspected calibration- all they needed to do was move the 06 PCM to one of the other Cobalts and pull'er again. WOT hmmm.... why didn't i think of that? You know you are a very wise man Wopontour. 16sy16 11-07-2005, 11:42 AM Hence his avatar :D | ||