|
: Tuning potatoe 03-03-2006, 06:27 PM Ok guys running the high boost levels... I want to know your opinion on what i should do. I dont know if i should run the bigger injectors with maf-t or mini afc, or run 4 extra injectors with the smt6 and possibly raise the limiter. Thanks Nathan 03gobluecobra 03-03-2006, 07:55 PM what mods do you have now? What are your plans for future mods? Are you considering getting a GM stage kit? potatoe 03-04-2006, 04:16 AM Right now im running 15 psi and CAI. I want to run 18-20, safe. I dont plan on getting the gm stage kits.. but im a gm tech so im going to try to get the programming. jmc007 03-04-2006, 02:23 PM I would choose to run 4 extra injectors to run over the stock ones, plus a SMT6 for the tune. potatoe 03-04-2006, 04:55 PM Ok thanks are you not happy with your set up? I also like the thinking of the sfmu... i think it could work with some thought. But... also if im running the injectors idle could be controlled with the stock injectors, boost will get the extra fuel from the auxillary injectors. jmc007 03-04-2006, 06:50 PM Ok thanks are you not happy with your set up? I also like the thinking of the sfmu... i think it could work with some thought. But... also if im running the injectors idle could be controlled with the stock injectors, boost will get the extra fuel from the auxillary injectors. I am happy for now, but at roughly 24% more power than stock it's difficult to trick the PCM sensors to get more than that ... Doc 03-04-2006, 08:50 PM I'd wait for the SMT-7 ;) | ||