I bought a pulley last year and I never got the screw's that came with it. Just wondering where I can maybe buy them?. Or do I just use the same one's?.

If its the GM hub your installing it on then just go to lowes and get the following hex head screws. 6mx1.0x16mm I had to shave off about 1mm of material from the end so it wouldnt cut into the nose of he sc. I also like the fact that I can now use a 6mm allen wrench to remove/ install a different pulley.

If its the GM hub your installing it on then just go to lowes and get the following hex head screws. 6mx1.0x16mm I had to shave off about 1mm of material from the end so it wouldnt cut into the nose of he sc. I also like the fact that I can now use a 6mm allen wrench to remove/ install a different pulley.


can you not just get 6mmx1.0x15mm

can you not just get 6mmx1.0x15mm

I looked for the 15mm length bolts, but they went from 10 to 12 to 16mm and up. Kinda strange, looks like they would go in 2mm or 5mm incriments.:confused:

Why can't you just use the stage 2 bolts if you replace the pulley?

You can get bolts from Pulleyboys, $3.99

http://www.pulleyboys.com/lsj28.html

Them are the ones that I used. They work great.