Hello,
I just bought myself the car I have wanted since it was released, a 2006 Chevy Cobalt SS SC with the G85 Performance Package. I am looking for some tips and suggestions. I have a few questions on the wheel hop. I have been directed to buy BWoody traction bars, and new motor mounts. I will link parts and description below. I have already set up with a local dealership to install the Stage 2. Should anything be done before I upgrade? My plans in order are to install the Stage 2 and Motor Mounts the same day. After that the BWoody Traction Bars, Strut Tower Bar, Sway Bars, Control Arms, LSJ Axels, Mid Length Header & Downpipe combo. I haven’t looked to see if the previous owner had put the K&N Cold Air intake on. Is there anything wrong with this approach? Anything I should be doing differently or in another order? I’m looking to hopefully get around 260-270hp. I heard that you need to drill holes on the bottom Control Arm for install of the BWoody Traction Bars. Is this true for my model? Also, will that still need to be done once the new Control arms are installed? All feedback and suggestions are greatly appreciated. Constructive criticism is appreciated as well
Motor Mounts
http://shop.zzperformance.com/store/...ishlist=268146
Traction Bars
http://bwoodyperformance.com/product...products_id=45
Strut Tower Bar
http://shop.zzperformance.com/store/...ishlist=268147
Sway Bars
http://shop.zzperformance.com/store/...ishlist=268148
Control Arms
http://shop.zzperformance.com/store/...ishlist=268149
Axels
http://shop.zzperformance.com/store/...ishlist=268155
Header
http://shop.zzperformance.com/store/...ishlist=268151
Linear Mode
