Cobalts SS banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So it all began with a cracked flex pipe. Replaced the pipe and flange that bolts up to exhaust manifold. Also replaced the gaskets on each end of the flex pipe/ catalytic converter. To the point though. I've replaced these gaskets 3 times already. 2 times with metal gaskets, and once with a paper type material. All three times the manifold to flex pipe gasket has leaked. I've caked it with copper ultra rtv, I've checked the surfaces with a straight edge, ect. I've done plenty of research on the causes and solutions for this issue. Still can't figure it out. Any suggestions would be much appreciated. Thanks
 
1 - 2 of 2 Posts
Top