Cobalts SS banner

Rear Brakes!!!

3115 Views 2 Replies 3 Participants Last post by  Pomiryusi
I'm working on a '06 SS 2.4L (non-supercharged one).

It needed Brake Pads and Rotors on all 4 corners.

Fronts went together real easy.

On the Rear I got everything apart but the pistons in the calipers will not go back in the caliper. I tryed using a c-clamp and loosening the bleeder.

Are the pistons the treaded type where you need a tool to spin the piston down in the caliper?

Thanks in Advance!

1 - 1 of 3 Posts
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.