Cobalts SS banner
1 - 20 of 86 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 · (Edited)
The Other Guys Headers "Group Purchase Price"

Description and pricing below:

Performance, Horsepower, Torque and Fuel Economy can all be yours with The Other Guys Exhaust Headers for the 2.0 Supercharged Chevrolet Cobalt SS and Saturn ION Redline. These headers are of the highest quality and The Other Guys are so confident of their workmanship they offer a Full Unlimited Lifetime Warranty against defects and damage. (Excludes coating and header wraps) The Other Guys Headers come standard with a hi-polished silver ceramic thermal coating on ALL surfaces, both inside and out, which greatly increases corrosion resistance and heat transfer within the pipes.

Proven results for serious power driven individuals! What are you waiting for!

TOG Headers features:

• 3/8” laser-cut flanges
• 4 into 1 design with 3” collector
• 14 gauge mild steel with 1 ¾” mandrel bent primary tubes
• All stock mounting points are retained including the O2 sensor position
• Hi-polished silver ceramic thermal coating inside and out.
• Easy bolt-on installation to factory stock exhaust
• All necessary hardware and gaskets included
• Will not void factory warranty
• No-fault lifetime warranty
• *49 state legal, Pending C.A.R.B. certification

Pre-production group purchase for the header only: $420.00 shipped (Continintal U.S. and Canada)

Performance, Horsepower, Torque and Fuel Economy can all be yours with The Other Guys Exhaust 3” down pipe with Hi-flow catalytic converter. Designed as a direct bolt-on to The Other Guys Header for the 2.0 Supercharged Chevrolet Cobalt SS and Saturn ION Redline with stock exhaust. The Other Guys do not cut corners and only use industry proven and quality performance exhaust components. The down pipe includes the highest quality “Flex Pipe” in the industry! The flexible pipe is double woven with stainless steel mesh inside and outside for strength, durability and noise reduction. They chose a catalytic converter that sets, rather than meets, the highest standards of product performance and efficiency in the industry. Aluminized steel piping used through out, to include a 3” to 2 ½” reducer to mate back to the stock exhaust. They finish with a Satin silver ceramic thermal coating on ALL surfaces, both inside and out, which greatly increases corrosion resistance and heat transfer within the pipes.

Proven results for serious power driven individuals! What are you waiting for!

TOG Down pipe with Hi-flow catalytic converter features:

• 3” Down pipe with Hi-flow catalytic converter
• Direct bolt-on to The Other Guys Header only
• Double woven with stainless steel mesh flex pipe
• Hi-flow catalytic converter with 3” inlet \ outlet
• 3 “ Aluminized steel piping through out
• Satin silver ceramic thermal coating on ALL surfaces, both inside and out
• 3” to 2 ½” reducer to mate back to the stock exhaust.
• All necessary hardware and gaskets included

*For off road use only*
Federal Law stipulates that a converter isn't supposed to be replaced with an aftermarket unit unless a vehicle has 50,000 miles or is 5 years old. Prior to that, the original equipment converter is covered by the factory warranty. If it fails, the vehicle owner is supposed to take it to the dealer and have it replaced under warranty. The only exception is if the original converter was physically damaged. Please review Federal, state and local laws regarding the replacement of your catalytic converter.


*This can only be used in conjunction with TOG headers. It will not work with stock manifolds*

Pre-production group purchase for the Down pipe with Hi-flow catalytic converter only: $295.00 shipped (Continintal U.S. and Canada)

Total for both pcs. is $715.00 shipped.


We are currently accepting Pre-production group purchase orders and will continue taking orders until Friday October 14th at 4:45 P.M. (PST)

All orders can only be placed by calling TOG direct at (951)351-9466. Visa, Master Card and American Express (Credit card, Debit Card) are forms of payment. Please be prepared to provide your information. Your order will be promptly invoiced and processed. All information provided is strictly confidential.


Thanks to all of you who provided your input and suggestions.

Regards,

Jon
The Other Guys Performance Products, Inc.
 

·
Registered
Joined
·
227 Posts
I maybe interested. Have their been any dyno runs with the headers yet? How much does the exhaust note increase? As stupid as this sounds, I want to keep my CSS as quiet as possible...just not a fan of small displacement exhaust tones. How bad is install?
 

·
Registered
Joined
·
22 Posts
Check out this same thread over on CobaltSS.net under the 2.0l disscusion group. 17 or so guys have already committed...myself included. They have the prototype done, but no dynos yets.
 

·
Premium Member
Joined
·
8,648 Posts
Im definitely interested but Id have to see a pic of the headers, and a few words on how they perform and a dyno sheet. Will all that be up before the end of the group buy? How long will the group buy last?
 

·
Registered
Joined
·
15 Posts
Its about time. I've been waiting very patiently for some parts and i'd happily buy a header. Would really like to see the dyno results, cause i'm currious to see if 3 inch exhaust would be too big for the car stock.
 

·
Banned
Joined
·
200 Posts
Rotgut said:
You can bet I'd slap a set of these on my SS. I loved the L67 version ones.
Why do you need a set of headers???

TOG's headers are very well made and proven to be probably the best header for the L67 (GTP motor) so I can imagine that the header made for the LSJ will be just as good.
 

·
Registered
Joined
·
1,196 Posts
i talked to jon @ TOG the other day on the phone. this is not an actual group buy, and no money is expected until he gets the production headers completed. he is only posting these threads in an attempt to guage interest and see how many people would be willing to pay $419 for a header he produces. he also understands that he needs to post numbers and photos of the completed unit before anyone buys them.... he's a pretty straight forward guy, i just think this thread was taken in a "pay up now for headers" kinda thread.

also, he is making a hi-flow cat and piping to go along with his header. this will be made from SS, the stock oxygen sensor will plug into it, and of course will be at an additional charge. his header has thermal coating internally and externally so it will be super cool in the engine bay. the coating option for msds headers is over $100 by itself, so you know you're getting a deal from TOG... the headers i believe also have a lifetime warranty..


please post your name in this thread if you are interested in saving $50 on the header from the pre-production order list. he is only trying to find out how many he needs to make, and there are a crapload of people signing up for them at some other forums, so if you wait, it might be a little while before you get yours.
 

·
Banned
Joined
·
200 Posts
Cobizzle, your sig is longer than 98% of my posts :rolleyes: I know youre a mod and all but come on.
 

·
Registered
Joined
·
1,196 Posts
Ronnie Pendergrass said:
I want one. $400 for a coated, warrantied, reputable header is not a bad price.

just start a list like this:

#1 ronnie pendergrass
#2




and so on, i don't think he checks the forums much so it is easier for him to just hop in and check a single list instead of reading 500 posts
 

·
Premium Member
Joined
·
8,648 Posts
How long before they go on sale, I dont wanna say I want one and then not have the cash saved up in time! But I do want one, just dont wanna put my name down yet until I find out when.

oh and GTP, it's just temporary, a lil joke, I hardly ever leave my siggies up for more than two or three days...

Edit: and for some reason, like on this one, some posts wont show it anyways, might be too long! lol
 

·
Banned
Joined
·
200 Posts
I think a user sig is shown in their first post in a thread, and then not shown unless manually selected before you submit the message, thats why it isnt shown in that post.
 

·
Premium Member
Joined
·
8,648 Posts
ohh, guess that makes sense, but it shows u pquite frequently in other threads and I never manually select it. Im gonna go ahead and just take it off now, and stop jackin this thread as well, sorry everybody.
 

·
Registered
Joined
·
1,196 Posts
CoBIZZLE said:
How long before they go on sale, I dont wanna say I want one and then not have the cash saved up in time! But I do want one, just dont wanna put my name down yet until I find out when.

he's already got the prototype done and someone has already volunteered a car for testing. he is working on a bunch of stuff appearently... i just called but no one was there. i'll get in touch with him today and get the specifics of what is going on and let you guys know about it
 

·
Premium Member
Joined
·
8,648 Posts
selfinfliction said:
he's already got the prototype done and someone has already volunteered a car for testing. he is working on a bunch of stuff appearently... i just called but no one was there. i'll get in touch with him today and get the specifics of what is going on and let you guys know about it
Thaks lil buddy!
 
1 - 20 of 86 Posts
Top